PEAK Grounding Filter Science: Solving The 43% Negative Side Effect Problem (Earthing Detox)

Understanding PEAK Grounding Filter Science

The Problem: Grounding & Earthing Offer Great Potential Health Benefits, but 43% Of People Who Ground Indoors Report Significant Negative Side Effects (Earthing Detox).

The Solution: Create A Grounding Filter System That Removes Up To 95% Of Electrical Noise Pollution From The Ground Line Attached To Indoor Socket Grounds And Outdoor Grounding Rods.

Industry-Wide Problem

The grounding industry wants to shut down any and all discussion of side effects. It is... inconvenient. Here at PEAK Grounding, we didn't stick our heads in the sand by selling our products to the 57% who report no side effects and ignoring the 43% who do report negative side effects.

PEAK Grounding Filters are completely unmatched in the industry. All of our filters provide at least 3 separate layers of filtration and protection that work synergistically to enhance your grounding safety and maximize your grounding health. At most, standard cords provide only a small 100kOhm resistor for safety, with no thought given to filtering out electrical noise pollutants like dirty electricity or contact current at all.

Each PEAK model incorporates different components depending on the size, cost and robustness of the filtration. However, they all incorporate state of the art passive circuit filters that work to remove all common electrical pollutants one might encounter while grounding or earthing for health purposes. 

No power or batteries are required. Universal compatibility is assured.

PEAK Grounding Filters plug directly into the grounding outlet in your wall socket, or your ground rod. They employ universal banana plugs and snap connectors that work on all standard grounding mats, sheets, etc.

For your health & safety, PEAK Basic and all of our filters contain at least the following:

• 200k Ohm Resistance Filter(s)
• Self Healing Safety Fuse (Max Trip 11mA)
• 19' of twisted thin gauge wire from input to output
• Premium thick non-conductive, water resistant case
• 4' short braided wire post filter to minimize capacitive coupling to environment 

Peak Pro Grounding Filter also incorporates:

• Entirely analog timer for up to 12 hours + hold (always on) for dosing or micro dosing your grounding

Peak Extreme Grounding Filter also adds the following:

• Low Frequency Filter Box with adjustable resistance 200kOhm Pot for varying the resistance and inductance curves of the entire filter. 
  • Low Frequencies Filtered = ~30Hz up to ~8kHz.
• Smaller High Frequency Filter Box
  • High Frequencies Filtered = ~1kHz up to ~200kHz+.
• Innovative design allows for maximum filtration of all harmful frequencies from ~30Hz up to ~200kHz+, while allowing DC current and low frequencies through.
  • The "Advanced" setting allows more DC and Schumann Frequencies. In studies, homeostasis with the Earth's natural "unpolluted" electromagnetic field in the DC and Schumann Frequency ranges has been associated with increased health.

Frequency vs Impedance Chart of PEAK Extreme

PEAK Extreme Filter "Advanced" Setting Vs. a Standard Grounding Cord containing only a 100kOhm Resistor

This chart illustrates the massive filtration provided by the PEAK Extreme filter set on the "Advanced" setting versus a standard grounding cord.

Let's dig in deeper to what the graph shows:

• Beginning at around 50Hz, the PEAK Extreme provides at least 2x the filtration of a standard cord.
• As the frequencies increase into the main AC power bands the filtration scales, with up to a 23x greater reduction in electrical pollutants like Dirty Electricity and Contact Current.
• At the same time, PEAK Extreme allows 2x to 3x more of the "good" frequencies, shown in green, to reach you. These are the DC and Schumann frequencies from 0Hz up to ~20Hz.

This is why we say,

"PEAK Extreme Grounding Filters give you more of what you want, less of what you don't."